Products Details

Mask ear belt spot welder


    半自动双点耳带机

    一、 概述

    将整卷耳带绳通过本机导轮自动送料,自动剪裁点焊在口罩(普通口罩或N95口罩)所需要的位置上。动作原理:是人工用手将口罩放置机器的旋转盘上,脚踩开关踩一次开始点焊一边的两点耳带绳,完毕后旋转盘马上启动旋转130°(N95至另一侧点焊耳带绳,焊接完取出即可。操作过程简单,新手即可使用。

    二、 特性

    1本机结构:机身采用铁板激光切割焊接,整机罩壳,不锈钢放料平台。

    2、表面处理:喷塑、镀白镀锌、磷化、氧化

    3、主要电气:PLC上海磐控,触摸屏台湾屏通,台湾明纬,正泰,工泰超声波

    4、主要气动:剪刀OPT台湾,其它原件为本地工厂加工定制

    三、 基本参数

    适用口罩:KN95和一次性口罩通用

    最高速度:12-15/每分钟

    用电方式:单相220V / 2.1KW整机功率

    超声波功率:20K2000W

    使用电机:86闭环步进电机,7W送料带电机,12W风扇

    工作气压:0.4-0.6mpa

    外形尺寸:1200MM×530MM×1260MM

    整机质重:200KG


    Mask ear belt spot welder
    Semi automatic double point ear belt machine

    1Overview

    The whole roll of ear belt rope is automatically fed through the guide wheel of the machine, and automatically cut and spot welded on the required position of the mask (ordinary mask or N95 mask). Action principle: manually place the mask on the rotating disk of the machine by hand, step on the switch once to start spot welding the two-point ear belt rope on one side. After that, the rotating disc will start to rotate 130 ° (N95) to the other side to spot weld the ear belt rope, and then take it out after welding. The operation process is simple, novice can use it.

    2Characteristics

    1. This machine structure: the machine body adopts the iron plate laser cutting welding, the whole machine cover, the stainless steel discharging platform.

    2. Surface treatment: plastic spraying, white zinc plating, phosphating, oxidation

    3. Main electrical: PLC Shanghai Pan control, touch screen, Taiwan Pingtong, Taiwan Mingwei, Chint, Gongtai ultrasonic

    4. Main pneumatic: scissors opt Taiwan, other parts are customized by local factory

    3Basic parameters

    Suitable mask: kn95 and disposable mask are common

    Maximum speed: 12-15 / min

    Power consumption mode: single phase 220V / 2.1kw whole machine power

    Ultrasonic power: 20k2000 w

    Motor: 86 closed-loop stepper motor, 7W feeding belt motor, 12W fan

    Working pressure: 0.4-0.6mpa

    Dimension: 1200mm × 530mm × 1260mm

    Weight: 200kg

    next item: AUTOMATIC GRINDER